Справочник Пользователя для CONTELA INC. CHAMOMILE-A1
Installation manual for LoRa Gateway
9(12)
Figure 1.20 Example of pole installation for LoRa Gateway 2
Once LoRa Gateway is installed, proceed with the RF service antenna connection, Backhaul
connection, AC power connection and grounding work.
3
A. RF service antenna connection
The RF service antenna connection connector uses N-type Reverse (N-50Ω) connector.
After connecting the antenna cable, finish it with a waterproof shrink tube to make it
waterproof. Fix the cables so that they do not shake in vibration or wind.
B. Backhaul Connection
RJ45 connector is used for backhaul connector, and Cable grand (DAM25, Dong-A) is
used for connector external waterproof connector. The Ethernet cable for Backhaul is
constructed by connecting method that can be waterproofed by using corrugated pipe
fitting to the cable grand.
After connection, waterproof finishing is done to prevent moisture from entering into the
enclosure by using waterproof shrink tube or waterproof silicone. Fix the cable so that it
does not shake with vibration or wind.
C. AC power connection
Be careful not to install this LoRa Gateway inside the
building because it is a GPS receiver embedded.
Cautions