Справочник Пользователя для Sonatest AP SONWP2

Sonatest WP2 - User Manual

Figure 5-2 Connectors on the right side of the veo

3 Connect the 8-pin Lemo connector to the encoder input (S connector on the right side of the veo).
4 Connect the GPIO, 8-pin, Lemo to the I/O input (I/O connector on the right side of the veo).
5 Turn on the veo and, on the Inspection tab, select Wheel Probe 2 in the GPIO list.

To connect the cable to the Prisma:

1 Unscrew the protective cap on the right side of the instrument and place it on the back of the unit (over the CE

markings).

2 Connect the phased array connector to the I-PEX connector and secure it with the hand screws.

Phased array connector (Samtec)

I/O connector

S connector