Справочник Пользователя для Sonatest AP SONWP2

Connecting the WP2

Figure 5-3 Connectors on the right and back sides of the Prisma

3 Connect the 8-pin Lemo connector to the encoder input (E connector on the back side of the Prisma).
4 Connect the GPIO, 8-pin, Lemo to the I/O input (I/O connector on the back side of the Prisma).
5 Turn on the Prisma and, on the Inspection tab, select Wheel Probe 2 in the GPIO list.

To connect the cable to the RapidScan2:

1 On the multi-way connector, turn the black handle to the open position.
2 Connect the multi-way connector on the RapidScan2 panel.

The connector should offer no resistance. If the connector does not easily fit, verify the condition of the connector
pins.

3 Once the multi-way connector is installed, turn the black handle to lock it in place.
4 Connect the 7-pin to 8-pin Lemo adaptor to the multi-way connector.
5 Connect the 8-pin Lemo (encoder) connector to the adapter.

Phased array
connector (I-PEX)

I/O connector

E connector