Справочник Пользователя для Fortin Auto Radio Inc. A2W01FM

 Idle mode is activated in much the same way Ready Mode is activated, except for Step 1. To activate Idle Mode 
(manual transmission) proceed with the following steps: 

IDLE MODE ACTIVATION:

 

and

 

 Open at least one door and ensure the transmission is in the NEUTRAL 
position.

  

 Engage the parking brake.

 Release the brake pedal. 

  

  

Push the START  button  .  The parking lights will flash once and then remain 
on. The remote Green Led flash and a ascending melodie will sound to 
confirm.  

 Remove the key from the ignition barrel.
 The vehicle will continue to run with the the Remote-Starter.

 Exit the vehicle and close all of the doors.
 The vehicle will continue to run after all the doors are closed.

   

 Lock the doors by pushing the LOCK  button  . The remote Green Led flash 
and bip once to confirm.  

 

The engine will continue to run until either the remote stop function is pressed (see USING THE REMOTE CONTROL, 
page 3), the Remote-Starter runtime expires, the parking brake is disengaged, the brake is pressed, or the hood 
is opened. If the Remote-Starter is shut down by transmitter it will automatically go in to Ready Mode (if all the doors 
are closed).

 Turbo Mode (if installed) is similar to Idle Mode but is used to cool down the turbo-charger once the driver leaves the 
vehicle. The Remote-Starter will continue run the vehicle for 2 minutes allowing the turbo-charger to cool down. To 
activate Turbo Mode (automatic transmission) proceed with the following steps:

 

 

 

 With the engine already running, press the remote START button until the 
parking lights come on. The remote Green Led flash and a ascending melodie 
will sound to confirm. 

 Remove the key from the ignition barrel.
 The vehicle will continue to run with the the Remote-Starter.

 Exit the vehicle and close all of the doors.
 The vehicle will continue to run after all the doors are closed.

  

  

 Press the LOCK  button  to lock the doors.  The vehicle will continue to run for 
60 seconds. The remote Green Led flash and bip once to confirm.

 Turbo Mode (if installed) is similar to Idle Mode but is used to cool down the turbo-charger once the driver leaves the 
vehicle. The Remote-Starter will continue run the vehicle for 2 minutes allowing the turbo-charger to cool down. To 
activate Turbo Mode (manual transmission) proceed with the following steps:
 See IDLE MODE (MANUAL TRANSMISSION) page 6.

 

Valet Mode disables both the Remote-Starter and Alarm system. Whenever the vehicle is being serviced or repaired, 
or the vehicle is parked indoors it is mandatory that Valet Mode be enabled to prevent an accidental Remote-Start. 

Page 7 / 13