Справочник Пользователя для Fortin Auto Radio Inc. A2W01FM
STEP 2
The LED will turn ON solid and remain ON.
To exit Valet Mode using the remote transmitter proceed with the following steps:
STEP 1
+
Simultaneously press LOCK and UNLOCK buttons for 1 second. The
remote Green Led flash and bip once to confirm. The parking lights will
flash once.
remote Green Led flash and bip once to confirm. The parking lights will
flash once.
STEP 2
The LED will turn OFF or will start to flash.
2-WAY REMOTE CONTROL
The 2-way remote control is built with the latest RF telecommunication technology. The remote control has a LED
and a speaker to provide both a audible and visual confirmation of the status of your vehicle.
and a speaker to provide both a audible and visual confirmation of the status of your vehicle.
2-way REMOTE CONTROL RESPONSE (LED AND SPEAKER)
LED
RESPONSE
RESPONSE
SPEAKER
RESPONSE
RESPONSE
STATUS
LOCK
1 Green
Flash
Flash
1beep
LOCK succeeded
1 Red Flash
1 low beep
LOCK failed, no communication. [1]
UNLOCK
1 Green
Flash
Flash
2 beeps
UNLOCK succeeded
1 Red Flash
1 low beep
UNLOCK failed, no communication. [1]
FUNCTION
1 Green
Flash
Flash
1beep
TRUNK succeeded
1 Red Flash
1 low beep
TRUNK failed, no communication. [1]
START
1 Green
Flash
Flash
1beep
START/STOP succeeded
Ascending notes [2]
The vehicle has STARTed.
1 Red Flash
Descending notes
[2]
[2]
The remote-starter failed to start or
shutdown normally.
shutdown normally.
1 Red Flash
1 low beep
START/STOP failed no communica-
tion. [1]
tion. [1]
NOTE [1]:
It is possible that the remote control was able to communicate with the remote-starter and that action
was performed successfully, but the remote-starter was unable to send its response back to the remote control.
Some factors such as radio interference may interfere with the communication between the remote control and
the remote-starter. See the TRANSMITTER RANGE page 12 and FAILED REMOTE-START page 13
Some factors such as radio interference may interfere with the communication between the remote control and
the remote-starter. See the TRANSMITTER RANGE page 12 and FAILED REMOTE-START page 13
NOTE [2]:
The response from the remote-starter may take up to 8 seconds or longer (diesel mode).
ALARM SYSTEM (IF EQUIPPED)
VEHICLE STATUS QUERY
The status of the remote-starters or alarm system can be queried via remote control with the following procedure:
Page 9 / 13