Справочник Пользователя для Beha Amprobe Beha Echometer 3000 Cable Lenth Measuring Device 2146202

To allow measurement of customer specific cable
types, reference ranges have been integrated in the
UNITEST Echometer 3000. The user can calibrate
and save the reference ranges for the specific cable
types. 

" Switch on UNITEST Echometer using the

key.

" Change to the reference range pressing

the

key, e.g. reference level I. REF I is

indicated on the display.

" Connect the red test lead to the red socket and

the black test lead to the black socket of the m-
range.

" Connect two leads in parallel of the cable to be

measured using the alligator clamps.

" To set the measurement unit (m/ft) press the

key. ''m'' or ''ft'' is indicated on the dis-

play. 

" Set measurement range selection dial to a free

memory location, e.g. switch position 1. 
100.0 m is indicated on the display.

" Set the known length of the cable to be calibrat-

ed using the 

or

keys.

" Save the length of the reference cable pressing

and 

keys. A simple signal

sound is audible.  

Note cable type, switch position and reference level

Now the length measurement of the cable type cal-
ibrated can be performed as described in section
6.1.

The reference range accuracy values depend
on the calibration accuracy of the customer
specific cable type. To comply with the accu-
racy values in accordance with the specified
technical data, the user must perform the cali-
bration of the cable type as described in the in-
struction manual. 

If the user requires to assign the reference ranges
to other cable types, the reference range must first
be deleted.
Free memory locations of the reference ranges are
indicated by the display ''100.0''. Already assigned
memory locations are indicated by the display ''- -
-''.

" Set UNITEST Echometer 3000 to the reference

range to be deleted.
''- - -'' is indicated on the display.

" Press the

key once. The message

''100.0'' is displayed. 

" If the alligator clamps are open press 

and

keys. An error measure-

ment is generated and indicated by the message
''Error''.

The reference range is deleted.

Start/Off

Ω