Справочник Пользователя для Lorex L15LD400

EXTERNAL DEVICE 

3. INTERVAL - Set the interval for the system to 

report its IP address to the DDNS server 
automatically. (D- day / H- hour / M- minute). Use 
the Mouse Wheel to change the value.        

4. REGISTER - Connect to the DDNS server and 

register the system information to the server. Click 
REGISTER to start the registration. 

5. DNS STATUS - Indicates the current status of 

DDNS connection 

• IP ADDRESS: Indicates the current IP address 

recorded in the server        

• IP PORT: Indicates the current IP port recorded 

in the server. 

• REMAIN TIME: Indicates the remaining time 

until the next connection to the server.        

6. LAST REGISTRATION DATE - Displays the time 

of the last registration. 

Controls the system bandwidth use (network 
speed). Settings between 1 (low) ~ 9 (high)

1. CHANNEL - Select the channel for PTZ (PAn/TILT/

ZOOM) Camera control. PTZ Camera is not 
included with the system.

2. MODEL - Select PTZ protocol.        

3. PTZ ID - Select PTZ ID.        

4. BAUDRATE - Select Baud Rate of PTZ control 

code. 

5. CMD DELAY - Set up a delay time to run the 

command. 

6. COMMAND - Pick up PTZ CMD.        

7. LENGTH - Displays the length of PTZ control code.        

8. CODE - The control code of PTZ CMD.