Справочник Пользователя для Lorex L15LD400

BACKUP 

Users can connect the System to a PC through the 
RS232 port. Other system control devices can also 
be connected through the RS232 port. The 
ASCII-Code information is in Serial port setup 
(Users cannot change value in this setting). 

1. BAUDRATE - The transmission baudrate is 

19200bps.       

2. LENGTH - The transmission length is 8 bits.        

3. STOP BIT - The stop bit is 1.        

4. PARITY - The parity is none. 

1. HDD - Indicates the start and the end recording 

date and time on the Hard Drive. 

2. USB - Select a starting date and time for backup. 

Use Mouse wheel to change the value, then select 
the SIZE to choose a backup size. 

3. SIZE - Insert the USB device, and the system will 

automatically check the disk size and display the 
available space onscreen. Use Mouse wheel to 
change the value. The system will automatically 
calculate the end date and time for backup. 

4. BACK-UP - Move the cursor to BACK-UP and Click 

it to begin the backup process. The System will 
save the file in AJP format. Users have to install 
the LorexPlayer 2.0 Backup Software to playback 
the file. Please refer to the provided Software 
Guide for further details.