Справочник Пользователя для Lorex L15LD400

EXTERNAL DEVICE

1. PAN SPEED - Set the PANing speed (0 low ~ 7 

high).

2. TILT SPEED - Set the TILTing speed (0 low ~ 7 

high).

3. ZOOM SPEED - Set the speed of ZOOM IN/OUT 

(0 low ~ 7 high).

1. SWITCH INTERVAL - Sets the sequence 

switching time (01 ~ 99 sec.).

2. ALARM POP UP - When an Alarm is detected, the 

corresponding channel (connected to the Alarm 
sensor block) pops up onscreen. 

3. MOTION POP UP - Sets the MOTION detection 

pop-up to ON/OFF. 

4. EVENT POP UP DURATION - If ALARM or 

MOTION events occur concurrently on several 
channels, then Channel 1 has first priority for 
onscreen POP UP.

• For example, if an events occurs on Channel 1, 

Channel 2 and Channel 4 at the same time, 
Channel 1 pops up. If motion stops on channel 
1, then channel 2 pops up for the set duration. 
If motion occurs on Channel 1 again (within the 
duration), Channel 2 continues to display. If 
motion on Channel 1 keeps on going even after 
the duration, Channel 1 pops up again.