Справочник Пользователя для Packard Bell REFDOCS02420200

 

7

 

 
 

To remove the DVD or CD-ROM drive, first remove the rear bezel (see section Removing 
the Rear Bezel), remove the left side cover (see section Removing the Left Side Cover), 
remove the right side cover (see section Removing the Right Side Cover), remove the drive 
bracket (see section Removing the Drive Bracket); then follow the steps below: 
 

1.  Disconnect all cables from the DVD or CD-ROM drive. 
2.  Remove the screws holding the 5.25-inch drive in the bay. 

 

 

 

3.  If required, remove the screws on the right side as well. 
4.  Slide the drive towards the front out of the bay. 

 
 

To remove the floppy disk drive, first remove the rear bezel (see section Removing the 
Rear Bezel), remove the left side cover (see section Removing the Left Side Cover), 
remove the right side cover (see section Removing the Right Side Cover), remove the drive 
bracket (see section Removing the Drive Bracket); then follow the steps below: 
 

1.  Disconnect all cables from the 3.5-inch floppy disk drive. 
2.  Remove the screws holding the floppy disk drive in the bay.