Справочник Пользователя для Packard Bell REFDOCS02420200

 

8

 

3.  If required, remove the screws on the right side as well. 
4.  Slide the floppy disk drive towards the front out of the bay. 

 
 

To remove the hard disk drive, first remove the rear bezel (see section Removing the Rear 
Bezel) and remove the left side cover (see section Removing the Left Side Cover), remove 
the front bezel (see section Removing the Front Bezel); then follow the steps below: 
 

1.  Carefully disconnect the four-wire power cable and the flat data interface cable 

from the hard disk drive. 

 

 

 

2.  Remove the screws in the front of the chassis holding the hard disk drive bracket to 

the chassis.