Информационное Руководство для Q-See QSTD5304

STEP 7. Write down the IP address, 

Subnet Mask, and Gateway assigned 
by the router.

STEP 8. Return to the Network Setup 

window in Step 4 and enter the 
information into the appropriate 
fields.

 

STEP 9. To prevent the router from 

changing your address information, 
remove the checkmark for DHCP 
(Blue box in 

Picture 8

) and click 

on OK to save your settings.

NOTE!  If  you  have  a  2Wire  brand  router,  you  may  now  click  on  OK  and 
proceed to Section 2 and determine the number of routers on your system.

STEP 5. Click on CHECK NOW to 

detect how many Routers are in the 
network.

To find out the number of routers on your network, you will need to download a 

 router 

detection program.

STEP 1.  Go to 
http://www.pcwintech.com/shanes-toolbox

STEP 2. Click on Detect Multiple 

Routers to begin the download.

STEP 3. Unzip the application to install it.

STEP 4. Click on the detect_routers 

application to run it.