Информационное Руководство для Q-See QSTD5304

Download the 

 Simple Port Forwarding program from:

Click on Download on Mirror 7 to download and install this program.

Once the program is installed, go to the 
Windows 

Start Menu (Windows icon in 

the lower left of your monitor)  and look for 
Simple Port Forwarding in the program list. 
Click on the program to launch it.

Once 

Simple Port Forwarding has launched, select your router from the list. The default  

Router IP and Login information will automatically come up. If you have previously changed 
the login information, then you will have to enter it manually

Click on “

+” at the bottom to open the window allowing you to set your ports.

In this case, you will need to proceed with the next section using the IP address for Router 1 
to forward its ports. After that, you will need to proceed to Section 4.

If Multiple Routers are Detected
If there are multiple routers, you will see a 
display similar to 

Picture 12

. 

If so, it may be preferable to connect your 
DVR and computer to the router that 
connects directly to the Internet. However, 
this is not always possible depending upon 
your particular situation. 

STEP 6. If there is only one router detected, then you may skip to Section 3: Simple 

Port Forwarding.