Справочник Пользователя для Netopia R310

This appendix is intended to help you troubleshoot problems you may encounter while setting up and using the 
Netopia R310. It also includes information on how to contact Netopia Technical Suppor t.

Impor tant information on these problems may be found in the event histories kept by the Netopia R310. These 
event histories can be accessed in the Statistics, Utilities, Tests screen.

This section covers the following topics:

■

■

■

If you encounter problems during your initial configuration process, review the following suggestions before 
calling for technical suppor t. There are four zones to consider when troubleshooting initial configuration:

1.

the computer’s connection to the router;

2.

the router’s connection to the telecommunication line(s);

3.

the telecommunication line’s connection to your ISP, and

4.

the ISP’s connection to the Internet.

If the connection from the computer to the router was not successful, check the following:

■

The Netopia R310 is turned on. 

■

An Ethernet cable connects your PC’s Ethernet card or built-in Ethernet por t to the Netopia R310.

■

The Smar tStar t application is running and able to access the Netopia R310.

■

Telnet is available on your PC or Macintosh. (On a PC, it must be specified in your system path. You can 
usually find the application as “c:\windowselnet.exe”.)

■

Your PC or Macintosh has an IP address, either automatically or statically assigned, and compatible with 
the default IP address of the router, 198.162.1.1.

■

Your PC or Macintosh has a subnet mask that matches or is compatible with the Netopia R310’s default 
subnet mask, 255.255.255.0.

■

If you are entering a new IP address via Smar tStar t be sure the correct serial number was entered.