Справочник Пользователя для Monarch Autoranging Digital Multimeter 110
MODEL 110 AUTORANGING DIGITAL MULTIMETER
4
1
2
3
6
7
8
4
5
9
V
A
V
A
uA
mA Hz
mA Hz
MIN
MAX
V
Hz
mA
uA
IEC 1010
POLLUTION DEGREE 2
F 0.5A 250V
F 10A 250V
WARNING
600V CAT II
3.0 Symbol Definitions and Feature Locations:
1)
LCD display
6)
Function selector switch
2) Relative
button
7) Common input connection
3)
Autorange – Manual button
8)
10A input connection
4) MAX/MIN
button
9) V, Ȏ, µA, mA, Hz,
connection
5)
AC/DC Current select and
Ȏ select button
10) Tilt
stand
Low Battery
Relative Reading Data Hold
Continuity Beeper
Diode
AC Symbol
Manual Range
Bargraph Indication
DC Symbol
MODEL 110 AUTORANGING DIGITAL MULTIMETER
11
6.0 Replacing Batteries and/or Fuses:
WARNING
To prevent electrical hazard or shock, turn multimeter off and disconnect test leads
before removing back cover.
before removing back cover.
6.1 Replacing
Batteries
To replace batteries, set the Function Selector switch to OFF and
disconnect test leads. Remove the three screws on the rear of the
instrument and remove the rear cover. Replace batteries, being
sure to observe battery polarity as shown below. Replace rear
cover before reconnecting or using the instrument.
disconnect test leads. Remove the three screws on the rear of the
instrument and remove the rear cover. Replace batteries, being
sure to observe battery polarity as shown below. Replace rear
cover before reconnecting or using the instrument.
6.2 Replacing
Fuses
To replace either or both fuses, set the Function Selector switch to
OFF and disconnect test leads. Remove the three screws on the
rear of the instrument and remove the rear cover. Replace the
appropriate fuse(s) with an exact replacement. F1 is a 0.5A/250V
Fast Blow fuse. F2 is a 10A/250V Fast Blow fuse. Replace rear
cover before reconnecting or using the instrument.
OFF and disconnect test leads. Remove the three screws on the
rear of the instrument and remove the rear cover. Replace the
appropriate fuse(s) with an exact replacement. F1 is a 0.5A/250V
Fast Blow fuse. F2 is a 10A/250V Fast Blow fuse. Replace rear
cover before reconnecting or using the instrument.
WARNING
For safety, use exact replacements:
F1: 0.5A/250V
5
³
u 20mm Fast Blow fuse
F2:
10A/250V 6.3
³
u 32mm Fast Blow fuse
0.5A/250V fuse -
- 10A/250V fuse
Screws