Справочник Пользователя для IBM LXE MX5

Скачать
Страница из 41
removed or has failed. The backup battery requires no user intervention. 
Replacement is performed by LXE. LXE recommends an MX5 in storage have a 
charged main battery pack installed. 
Note:   This mobile device's backup battery maintains it’s charge by drawing 
power from the main battery pack. Always store unused devices with a 
fully charged main battery pack installed. LXE recommends an in-use 
mobile device be frequently connected to an external power source to 
retain optimum power levels in the main battery pack and the backup 
battery. When the backup battery and main battery pack are dead, the 
mobile device reverts to setup defaults when a fully charged main 
battery pack is installed and the device is powered On again. 
Battery Hot-Swapping 
Replace the main battery pack after first pressing the power key and placing the 
MX5 in Suspend Mode. LXE recommends any work in progress be saved prior to 
replacing the main battery pack. 
Simply replace the discharged main battery with a fully-charged main battery. 
The backup battery will retain data during a main battery hot-swap.  
Place the battery in the battery well, making sure the tabs on the bottom of the 
battery pack fit into the slots at the bottom end of the battery well. Push the 
battery down into the battery well while fastening the screws. Fasten the screws 
tight enough to allow the rubber gasket to create a watertight seal. If the screws 
do not easily twist into the threaded opening, remove the battery and repeat the 
process. 
Checking Battery Status 
Tap the Windows icon | Settings | System | Handheld | Power tab. Battery 
level, status and charge remaining is displayed.  
Tap the Windows icon | Settings | System | Handheld | Battery Info tab 
to view technical information  and number of charge cycles for the Main Battery. 
Main Battery ChargingLeft GREEN LED slow flashing. 
Main Battery Low 
Low Battery Icon appears on the 
“Today” page. 
Main Battery Fully 
Charged 
Left GREEN LED stops flashing; is 
solid ON. 
Charge / battery fault Left GREEN LED has quick double 
flashes. 
Backup Battery 
Dialog appears on the screen to alert