Справочник Пользователя для IBM LXE MX5

Critically Low

the user.

Battery Chargers

Charge Battery in LXE Multi-Charger

The main battery can be charged in the LXE Multi-Charger. The Multi-charger

must

not

be used in Hazardous Locations.

Insert the main battery into any charging cup in the Multi-Charger. The narrow

end goes into the charging cup first. The retaining clip snaps the battery into

place in the charging cup. Remove the battery pack by pulling the battery

straight up and out.
Do not "slam" or drop the battery into the charging cup. Failure to follow these

instructions can result in damage to the main battery or the Multi-Charger.

Note: The main battery can also be charged in the secondary battery charging

pocket in the Desktop cradles. An MX5 does not need to be in the cradle

at the time the secondary charging pocket is being used.

LXE Multi-Charger (Optional)

The main battery pack can be charged in the LXE Multi-Charger. Please refer to

the “MX5 Multi-Charger Operator’s Guide” for instruction.
The multi-charger requires an external power source before battery pack

charging can commence. The external Power Supply connection for the Multi-

charger is shipped with the multi-charger.

The LXE Multi-Charger is not approved for use in a Hazardous Location.

Cradles

Note: The “MX5 Cradle Reference Guide” contains cradle installation and

technical information.

Important:

The cradles are not designed to secure an MX5 with

protective padded case. The vehicle cradle is not

designed to secure an MX5 with a trigger handle. The
desktop cradles will secure MX5’s with handstraps or

trigger handles.

MX5 docking cradles give the MX5 the ability to communicate with a host

computer and other devices. In addition, using wall AC adapters or DC/DC