Справочник Пользователя для IBM LXE MX5

converters, the cradle charges the Main Battery. The MX5 can be either on or in 

suspend mode while in the cradles.  
LXE offers three desktop cradles and one vehicle cradle: 

Standard Desktop Cradle

 requires AC power before 

main battery charging can commence. This cradle 

does not have an active LED on the front housing. 

MX5A002DESKCRADLE 

Enhanced Desktop Cradle

 requires AC power before 

main battery charging can commence. It will charge 

both the main battery in the MX5 and another MX5 

Battery Pack at the same time. 

MX5A003EDESKCRADLE 

Enhanced Desktop Cradle with Ethernet Port

 requires 

AC power before main battery charging and host/client 

communications can commence. It will charge both 

the main battery in the MX5 CE. NET device and 

another main battery pack at the same time. 
MX5A004ETHDESKCRADLE 

Vehicle Mount Cradle

 requires AC/DC power before 

main battery charging can commence. 

MX5A001VMCRADLE 

Note:  LXE offers a device similar in appearance to the MX5 Pocket PC device – 

the LXE MX5 CE. NET device. All MX5 cradles can be used by the MX5s. 

The Enhanced Desktop Cradle with Ethernet Port, developed 

specifically for the MX5 CE. NET device, cannot be used by the MX5 

PC 2002. 

Cradle COM port and power cables are available from LXE. The RS-232 connector 

is located on the back of the cradle. When the MX5 is properly docked, the COM 

1 RS-232 interface connects with the DA9 RS-232 port in the cup at the front of 
the cradle. The cup at the back of the desktop cradles accept a single Battery 

Pack for charging. 
The Ethernet port is located at the back of the Enhanced Desktop Cradle with 

Ethernet Port. 

All LXE manuals are now available on one CD and they can also be 

viewed/downloaded from the LXE website. Contact your LXE representative to 

obtain the LXE Manuals CD.