Справочник Пользователя для Hughes HN7700S

 

This manual explains how to install, commission, and service the 
Hughes HN7700S as a Terrestrial Broadband Router (HN router). 
The manual also includes installation information for the DSL 
and T-1 transport methods used with the HN router. This chapter 
discusses the following topics:

• Scope and audience on page 1
• HN router overview on page 1
• Router specifications on page 2
• Commissioning on page 3
• Installation and commissioning steps on page 4

The HN7700S has dual functions. This manual covers the 
HN7700S’ function as a router. It is also used as a VSAT 
terminal. 

This manual is intended for use by the following audiences:

• Professional installers
• Installer trainers, who prepare separate instructions for the 

installers

• Call center operators, who respond to customers’ calls
• Call center trainers, who train call center operators

This manual is intended for use in the United States and Canada. 
Certain information may vary depending on the customer’s 
location. This manual identifies such differences where 
applicable.

In this guide, the term HN router refers to the HN7700S acting as 
a router. Transport devices refer to the Siemens 4100/4101 
SpeedStream Modem or the ADTRAN Total Access 660R T-1 line.

The HN router, as shown in Figure 1 on page 2, is a standalone 
unit that provides an integrated broadband LAN solution to 
platforms running IP over Ethernet. The HN router provides two 
10/100 LAN ports with one being used for local LAN 
connectivity and one being used for WAN connectivity. The 
Ethernet LAN port can be connected via a straight-through or