Справочник Пользователя для American Power Conversion 3-in-1 Wireless Mobile Router

The Wireless Security Screen

4-4

The Wireless Security screen displays after clicking the Wireless Security button on the AP/Router Setup screen. The default security 
setting is Disabled. No configuration is required. Data is not encrypted before transmission. Depending on the security system selected, 
the following screens display:

When WEP is selected on the Wireless Security screen, the following screen displays.

The following table describes the fields on the WEP Wireless Security screen.

Select the desired option:

Disabled

WEP

WPA-PSK

The screen will change according to the current selection. The following settings are visible only 

if WEP is selected.

Normally, this should be left at the default value of Auto. If changed to Open System or Shared 

Key, ensure that the Wireless stations use the same setting.

Select the desired option. Wireless stations must use the same setting.
64 Bit (10 Hex chars) - data is encrypted, using the default key, before being transmitted. Enter at 

least the default key. For 64-bit encryption, the key size is Hex 10 chars.
128 Bit (26 Hex chars) - data is encrypted, using the default key, before being transmitted. Enter 

at least the default key. For 128-bit encryption, the key size is 26 Hex chars.
Note: Hex chars are 0~9 and A~F.

 

Select the key to use as the default. The Default key is used to encrypt transmitted data; the other 

keys are for decryption only. 

 

It is necessary to enter a Key Value for the Default key. Other stations must have the same key.

Use this option to generate a key from a phrase, instead of entering the key value directly. Enter 

the desired phrase, and click the Generate Keys button.