Справочник Пользователя для American Power Conversion 3-in-1 Wireless Mobile Router

The Ethernet (WAN) Port Status

4-11

To check the status of the Ethernet (WAN) port connection, click the Status button on the AP/Router Setup screen. This opens a window 
and the screen that displays depends upon the connection method currently in use.

If the access method is Travel mode or No Login, a screen similar to the following displays when the Status button is clicked.

The following table describes all possible fields on the Fixed/Dynamic IP Address Screen.

The hardware address of this device, as seen by remote devices on the Internet. (This is different to the 

hardware address seen by devices on the local LAN.)

The IP Address of this device, as seen from the Ethernet (WAN) Port interface. If using DHCP, and 

there is no current connection, this field will be blank or display 0.0.0.0.

The Network Mask associated with the IP Address above.

The IP Address of the remote gateway or router associated with the IP Address above.

The IP Address of the Domain Name Server that is currently used.

This indicates whether or not this device is functioning as a DHCP client. 
If acting as a DHCP client, the IP address above has been allocated by the DHCP Server on the LAN 

or WAN.
If not a DHCP client, the IP address (if shown) is fixed or static.
If using DHCP, the Lease Obtained and Remaining lease time fields indicate when the IP address 

allocated by the DHCP Server was obtained and when it will expire. The lease is automatically renewed 

on expiration.