Справочник Пользователя для American Power Conversion 3-in-1 Wireless Mobile Router

The Ethernet (WAN) Port Status

4-13

The following table describes the Connection Log Messages. 

The Connection Log shows status messages relating to the existing connection.
The most common messages are listed in the section “The following table describes the Connection 

Log Messages..”
The Clear Log button will restart the log, while the Refresh button will update the messages shown on 

screen.

Deletes all data currently in the log, making it easier to read new messages.

If not connected, establishes a connection to the ISP.

If connected to the ISP, hangs up the connection.

Updates the data on screen.

Connection attempt has been triggered by the Connect automatically, as required setting.

Connection attempt started by the Connect button.

Preparing line for connection attempt.

Attempting to connect to the ISP's server.

ISP's server has responded to connection attempt.

Attempting to log in to ISP's Server and establish a PPP connection.

Able to login to ISP's server and establish a PPP connection.

The connection has been idle for the time period specified in the Idle Time-out field. The 

connection will now be terminated.

The current connection is being terminated, due to either the Idle Time-out above, or 

Disconnect button being clicked.

ISP's server did not respond. This could be a server problem, or a problem with the link to the 

server.

Unable to establish a PPP connection with the ISP's server. This could be a login problem 

(name or password) or a server problem.

The existing connection has been lost. This could be caused by a power failure, a link failure, 

or server failure.

The data received from the ISP's server could not be processed. This could be caused by data 

corruption (from a bad link), or the server using a protocol which is not supported by this 

device.