Инструкции Пользователя для Garmin Vector S

To upgrade your Vector system, go to 

.

• For 7 LED flashes, wait for the pedal pods and pedals to 

complete the software update.
NOTE: Do not disconnect the pedal pod or remove the pedal 

pod batteries during a software update.

The static torque test is intended for advanced cyclists and 

installation experts. This test is not required under normal 

circumstances to achieve good results with the Vector system. 

This test is available for the Edge 1000, 810, and 510 devices.

Garmin recommends performing the static torque test a 

minimum of three times and averaging the reported torque 

values.

Go to 

, and click on the FAQs 

link for detailed instructions.

Following repeated static torque tests, if the reported torque 

value is consistently different than the expected value, you can 

enter a scale factor for one or both pedals. The scale factor is 

stored in the pedal and adjusts the power value that is 

calculated on the pedal. The scale factor is sent to the Edge 

device and stored on Edge device.

The Vector system works with most crank arm types, including 

carbon. It fits most crank arm sizes with either the standard (12 

to 15 mm thick) or large (15 to 18 mm thick) size. The Vector 

system is compatible with crank arms up to 44 mm wide.

For a list of devices that are compatible with Vector, go to 

Appendix

9