Инструкции Пользователя для Garmin Vector S

Rotate the pedals a few times in order to activate Vector.

From the home screen, select   > Sensors >   > Sensor 

Details > Crank Length.

Enter the crank length, and select  .

Before you set the installation angles, you must set the Edge 

data fields to display power and cadence.

Go for a short ride on a trainer or on the road.

Ride until the cadence is nearly 70 rpm.

Accelerate smoothly to approximately 90 rpm.
When the installation angles are successfully set, a message 

appears and data fields display power data on the Edge 

device (1000, 810, and 510 only).

This procedure contains instructions for the Edge 1000, 810, 

800, and 510 devices. If you have another compatible device, 

.

Hold a data field to change it.

Select a category.

Select a data field.

Vector measures pedal-based power.
Vector measures the force you apply a few hundred times every 

second. Vector also measures your cadence or rotational 

pedaling speed. By measuring the force, the direction of force, 

the rotation of the crank arm, and time, Vector can determine 

power (watts). Because Vector independently measures left and 

right leg power, it reports your left-right power balance.
NOTE: The Vector S system does not provide left-right power 

balance.

Cycling dynamics metrics measure how you apply power 

throughout the pedal stroke, and where you apply power on the 

pedal, allowing you to understand your particular way of riding. 

Understanding how and where you produce power allows you to 

train more efficiently and evaluate your bike fit.

Before you can use cycling dynamics, you must pair the Vector 

power meter with your device (

).

NOTE: Recording cycling dynamics uses additional device 

memory.

Go for a ride.

Scroll to the cycling dynamics screen to view your peak 

power phase 

À

, total power phase 

Á

, and platform center 

offset 

Â

.

If necessary, hold a data field 

Ã

 to change it (

).

NOTE: The two data fields at the bottom of the screen can be 

customized.

You can send the ride to your Garmin Connect

™

 account to view 

additional cycling dynamics data (

).

Power phase is the pedal stroke region (between the start crank 

angle and the end crank angle) where you produce positive 

power.

Platform center offset is the location on the pedal platform where 

you apply force.

Some bike tools may scratch the finish of Vector components.

• Use wax paper or a towel between the tool and the hardware.
• After any bike adjustments, rotate the crank arm to check for 

clearance.

• Keep Vector components clean.
• When moving Vector to another bike, clean the threads and 

surfaces thoroughly.

• Go to 

 for the latest updates 

and information.

Your ride data or history is recorded to your Edge device or 

another compatible Garmin device. This section contains 

instructions for the Edge 1000.
NOTE: History is not recorded while the timer is stopped or 

paused.
When the device memory is full, a message appears. The 

device does not automatically delete or overwrite your history. 

You should upload your history to your Garmin Connect account 

periodically to keep track of all your ride data.

To prevent corrosion, thoroughly dry the USB port, the weather 

cap, and the surrounding area before charging or connecting to 

a computer.

Pull up the weather cap 

À

 from the USB port 

Á

.

Training

3