Справочник Пользователя для Brother PQ1500S

1 Raise presser foot, and raise

needle to highest position.

2 Loosen and remove screw using

screwdriver.

13

Note  

Make sure the power is off before changing presser feet.

3 Attach zipper foot and tighten

screw.

✽ Use the same method to attach

the other feet that come with your
PQ1500S.

✽ See page 18 for directions on at-

taching the “Walking Foot”.

✽ Use the position knob on back of

the zipper foot to adjust position
of foot in relation to needle.

✽ Only the zipper foot has a posi-

tion knob. You can begin sewing
with all other presser feet imme-
diately after attaching.

● Pin Feed Foot

For perfect stitch-
ing on otherwise
difficult fabrics like
velvet, leather and
suede.

● General purpose Foot

This foot is used for
most sewing. (Can also
be used for sewing
thick fabrics or seams.)

✽ When sewing thick

seams, lightly guide
the fabric with your
hand on the down-
ward side of the seam.

✽ Can also be used

with pin feeding.

● Rolled Hem Foot

Use on the edge of
fabric, such as on
hems of dress
shirts, to fold the
edge of the fabric in
three while sewing.

● Zipper Foot

Use to attach fasten-
ers other than con-
cealed fasteners.

● Invisible Zipper

Foot
Use to attach con-
cealed fasteners.

● 1/4” Foot

For quilt and patch-
work piecing with
1/4” or 1/8” seam
allowance.

● Quilting Foot

Spring action foot
for darning, quilting
or free-motion em-
broidery.

● Walking Foot

For sewing or quilt-
ing on fabrics which
stick or tend to slip
Useful for sewing
multiple layers as in
quilting.

✽ Use only feet supplied with your PQ1500S. Each foot is spe-

cially designed for this machine and has clearance for the pin at
the rear of each foot. Use of other presser feet with the PQ se-
ries machines may damage or break the pin feed mechanism.