Справочник Пользователя для Brother PQ1500S

15

Note  

Make sure power is off before changing feet.

1 Attach rolled hem foot.
✽ Refer to page 13 for instructions

on changing sewing feet.

2 Insert needle approximately 0.5

cm from the edge of the fabric
and sew 2 stitches.

0.5 cm

0.5 cm

Rolled Hem

5 With your right hand, put the

edge of the rolled hem under the
presser foot, from the spot where
the threads come out. Insert the
edge so that it lies directly under
the needle. Lower the presser
foot.

6 Pull gently on threads in left hand

while sewing the first 3-4 stitches
to hold them in place.

7 Fold hem over about 0.5 cm and

continue feeding folded hem un-
der foot while sewing towards the
curved guide on the foot.

3 Turn the hand wheel towards you

to raise the needle, raise the
presser foot, then pull the fabric
forward.

4 Hold the 4 threads in your left

hand.