Справочник Пользователя для Brother PQ1500S

14

1 Lift foot, pull about 15 cm of upper

and bobbin thread under and behind
foot, and position fabric under foot.

2 Lower presser foot lever to lower

foot.

3 Turn the hand wheel forward you to

lower the needle through the fabric,
then step gently on the foot control-
ler to begin.

4 Raise needle to highest position.
5 Lift foot, remove fabric and cut

thread.

✽ When using thread trimmer:
4 Push thread trimmer button (this will

cause the upper and bobbin threads
to be cut automatically and the
needle to stop in a raised position).

5 Lift presser foot and remove fabric.

1 Make sure needle is pierced all the

way through fabric.

2 Lift presser foot, and turn fabric us-

ing needle as an axis.

3 Lower foot continue sewing.

✽ At the beginning and end of a seam,

press down the reverse stitch lever
and backstitch about 1 cm.

Before 
sewing.

Begin 
sewing.

Finish 
Sewing.

✽ When changing sewing directions.

Backstitches

1 cm

1 cm

✽ The fabrics shown

above can be joined
evenly by activating
the pin feed mecha-
nism.

The feed pin passes up through all layers of fabric moving with the feed dog’s motion
to feed all layers of the fabric evenly.

✽ For safety, the feed pin is automatically lowered when presser foot is raised.

Fabric:
Velvet
Quilt
Synthetic Suede
Knit
Coading
Others

1 Move feed adjustment knob

to pin feeding position.

2 Adjust pressure ad-

justment dial until indi-
cator needle is in the
right position in the
matching color coded
area.

3 Gently pull thread until feed pin

catches fabric and sew.

Feed Pin

Feed Pin

Fabric

Feed Dog

Indicator Needle