Справочник Пользователя для Mitsubishi Electronics C64T
8. Spindle Parameters
8.3 MDS-B-SP/SPH, MDS-C1-SP/SPH
233
No. Items
Details
Setting
range
Standard
setting
3457
(PR)
to
3520
(PR)
SP257
to
SP320
RPM
BSD
BSD
Motor
constant
(H coil)
constant
(H coil)
This parameter is valid only in the
following two conditional cases:
(a) In case that SP034 (SFNC2) bit0=1
following two conditional cases:
(a) In case that SP034 (SFNC2) bit0=1
and SP034 (SFNC2) bit2=0
Set the motor constants when using a
special motor, not described in the
SP040 (MTYP) explanation and when
not using the coil changeover motor.
Set the motor constants when using a
special motor, not described in the
SP040 (MTYP) explanation and when
not using the coil changeover motor.
(b) In case that SP034 (SFNC2) bit0=1
and SP034 (SFNC2) bit2=1
Set the motor constant of the H coil of
the coil changeover motor.
Set the motor constant of the H coil of
the coil changeover motor.
(Note) It is not allowed for the user to
change the setting.
0000 to
FFFF
HEX setting
FFFF
HEX setting
0000
3521
(PR)
to
3584
(PR)
SP321
to
SP384
RPML
BSDL
BSDL
Motor
constant
(L coil)
constant
(L coil)
This parameter is valid only in the
following conditional case:
(a) In case that SP034 (SFNC2) bit0=1
following conditional case:
(a) In case that SP034 (SFNC2) bit0=1
and SP034 (SFNC2) bit2=1
Set the motor constant of the L coil of
the coil changeover motor.
Set the motor constant of the L coil of
the coil changeover motor.
(Note) It is not allowed for the user to
change the setting.
0000 to
FFFF
HEX setting
FFFF
HEX setting
0000