Справочник Пользователя для Mitsubishi Electronics C64T
15. Indexing Axis Commands
290
15. Indexing Axis Commands
(Note) These parameters are used only with the G64T.
Item
Details
Setting range (unit)
POSITION
Command the indexing position.
–99999.999
to 99999.999
to 99999.999
(0.001mm/0.001°,
0.0001mm/0.0001°)
SPEED
Set the indexing speed.
0 to 999999
(mm/min, °/min)
(mm/min, °/min)
INPOS
Set the in-position width, which indicates the output
range of the in-position signal output when
positioning is completed.
range of the in-position signal output when
positioning is completed.
0 to 99999.999
(0.001mm/0.001°,
0.0001mm/0.0001°)
FLAG
0: Normal indexing position command
1: Position command valid for external positioning
2: Indexing command compensation valid
1: Position command valid for external positioning
2: Indexing command compensation valid
0/1/2
100 sets can be set for each axis.
When changing the axis, set the axis No. after "X" in the first setting area, such as # (X2), and then
press INPUT. Axis No. "1" corresponds to the 1st peripheral axis.
When changing the axis, set the axis No. after "X" in the first setting area, such as # (X2), and then
press INPUT. Axis No. "1" corresponds to the 1st peripheral axis.
(Example 1) To change to 2nd peripheral axis
# ( X2) INPUT
(Example 2) To change to 4th peripheral axis
# ( X4) INPUT