Справочник Пользователя для Kodak 9090DC

A-61662   October 2011

2-1

Installing the exit deflector .............................................................. 2-1

Installation: with a USB connection ................................................ 2-2

Installation: with an optional SCSI connection ................................ 2-3

This section provides detailed information supporting the Installation 
Guide that is provided with your scanner. Follow these steps in the 
order they are provided to install your scanner.

NOTES:

• If you have already performed all of the steps in the Installation 

Guide, skip this section.

• When positioning the scanner, be sure to provide adequate 

clearance at the back of the scanner if you will be using the rear 
document exit. For more information on the rear document exit, see 
Appendix C, Installing and Using the Straight Pass-Through Adapter.

• The scanner weighs approximately 112 pounds (50.8 kg). Be sure to 

incorporate the appropriate manpower before moving or lifting the 
scanner.

• Verify that your host PC meets the system requirements as specified 

in Appendix A, Specifications.

• The scanner is packed with a set of language-specific Control Panel 

overlays. The English overlay is installed on the scanner. If you prefer 
a different language, take the desired overlay and adhere it to the 
control panel.

The scanner is packed with two exit deflectors. The exit deflector aids 
in better document stacking. The standard exit deflector should be used 
for most of your scanning needs. The lightweight exit deflector should 
be used when scanning light-weight documents.

• Install the exit deflector by clipping it to the rail at the top of the 

scanner.