Справочник Пользователя для Q-Logic 59060-02 B

3 – Event Messages

Alarm Events

59060-02 B

3-21

A

Meaning:

Configured port settings conflict with the hardware capabilities of 
the port. The ports is downed.

Action:

Reconfigure the port to be compatible with the port hardware.

(A1006.0004) (Zoning conflict, device_WWN is in an ACL hard zone, but device_WWN 

share a soft zone)
Meaning:

The named zone members cannot communicate because they are 
members of different ACL hard zones.

Action:

Place both zone members in the same ACL hard zone or exclude 
both from ACL hard zones.

Meaning:

An error occurred while checking ACL zoning.

Action:

Contact your authorized maintenance provider.

(A1006.0006) (Zoning conflict, device_WWN and device_WWN do not share an ACL hard 

zone, but device_WWN share a soft zone)
Meaning:

The named zone members cannot communicate because they are 
members of different ACL hard zones.

Action:

Place both zone members in the same ACL hard zone or exclude 
both from ACL hard zones.

Meaning:

A device was not authorized or it failed security checks and will not 
be allowed to join the fabric.

Action:

None.

(A1007.0002) (Security: WWN device_WWN not authorized to join))

Meaning:

The device WWN is either not configured in the security data base, 
or it is not configured for Challenge Handshake Authentication 
Protocol (CHAP).

Action:

Add the device WWN to the active security set if it missing, or 
modify the group to allow for CHAP authentication with the other 
devices.

(A1007.0005) (Security: Authentication request was rejected by port.)

Meaning:

Indicates that a remove switch rejected a security authentication 
attempt. The port will isolate.

Action:

Checks the security configuration on the remote switch to 
determine the problem.