Справочник Пользователя для Q-Logic 59060-02 B

3 – Event Messages

Alarm Events

59060-02 B

3-23

A

Meaning:

The current security policy calls for restrict mode which means that 
all switches in the fabric must have the same security databases or 
the ISLs will not login. In this case, the security databases differ.

Action:

Reconfigure the active security set so that the ISL group members 
are the same.

(A1007.000D) (Security policy in mode mode, other switch in mode mode, sec db conflict)

Meaning:

The security policy on the local switch differs from that of the 
remote switch.

Action:

Configure the security policy on the remote switch to match that of 
the local switch.

(A1007.000E) (Security: Auth challenge received from WWN port_WWN, not Authorized to 

join)
Meaning:

A challenge authentication frame was received from a remote 
switch, but the local switch does not have an entry for itself within 
the active security set ISL group.

Action:

Edit the ISL group to include the local switch.

authenticate)
Meaning:

An Authentication Response frame cannot be built because the 
CHAP session is not in the right state. The port will isolate.

Action:

Check the remote device for a possible error condition. Reset the 
port to retry again. If errors continue, disable CHAP for this device 
if it belongs in the fabric.

to authenticate)
Meaning:

The CHAP session state is not in the correct state for a Challenge 
message. Port will isolate.

Action:

Check the remote device for a possible error condition. Reset the 
port to retry again. If errors continue, disable CHAP for this device 
if it belongs in the fabric.

Meaning:

Frame does not match format for a CHAP status frame. Ports will 
isolate.

Action:

Check the remote device for a possible error condition. Reset the 
port to retry again. If errors continue, disable CHAP for this device 
if it belongs in the fabric.