Справочник Пользователя для Nortel Networks Modular ICS 4.0

88 / Forwarding your calls

Modular ICS 4.0 System Coordinator Guide

P0881591 Issue 01

You cannot use the Line Redirection feature on either an 
M7100 telephone or a telephone connected to an ATA.

ƒ°›

1. Press 

ƒ°›.

2. Select the outgoing line to be used for redirected calls.

3. Enter the number to which calls are redirected (the ways 

you can do this are listed below).

4. Select the lines to be redirected.

Enter the telephone number to which you want to redirect 
calls, using one of the following methods: 

•

Press an external autodial button.

•

Enter an external telephone number (using no more than 
24 digits) then press 

˙ or OK.

•

Press 

˙ or OK if the line you have chosen as the 

outgoing line is a private network line that does not require 
you to dial digits.

If you use ALL to redirect all your lines, it is important that you 
wait until all the lines on your telephone light up before 
pressing 

˙ or OK. If you press ˙ or OK 

before all the lines light up, those lines not lit are not 
redirected.

p0881591.book  Page 88  Wednesday, August 19, 1998  6:43 PM