Справочник Пользователя для Nortel Networks Modular ICS 4.0

138 / Programming Hunt Groups

Modular ICS 4.0 System Coordinator Guide

P0881591 Issue 01

Member order within a Hunt Group is important. The member 
order determines how a call is routed through a Hunt Group.

1. Place the programming overlay on any M7310 or M7324 

telephone.

2. Press 

ƒ••¤flfl‹›› (CONFIG). 

The display shows Password:.

3. Press

 

‡¤‡fi°‡ (SCPLUS). The display shows 

Terminals&Sets.

4. Press 

‘ until the display shows System 

prgrming.

5. Press 

≠. The display shows Hunt groups.

6. Press 

≠. The display shows

 

Show group.

7. Enter the Hunt Group number you want to program (1-30).

8. Press 

≠. The display shows

 

Member DNs:.

9. Press 

≠. The display shows the members for that 

group.

10. Press MOVE to move an existing member to another place 

within the Hunt Group. The display shows the member 
number followed by an arrow.

11. Enter the new position number for the extension.

12. Press 

® to exit or ‘ to continue programming.

Configure the prime set for a Hunt Group’s line to None to 
avoid delayed ring transfer of external Hunt Group calls to the 
prime set before the Hunt Group can receive the call.

A line can be assigned to only one group.

p0881591.book  Page 138  Wednesday, August 19, 1998  6:43 PM