Справочник Пользователя для Nortel Networks Modular ICS 4.0

Programming Hunt Groups / 139

P0881591 Issue 01

Modular ICS 4.0 System Coordinator Guide

1. Place the programming overlay on any M7310 or M7324 

telephone.

2. Press 

ƒ••¤flfl‹›› (CONFIG). 

The display shows Password:.

3. Press

 

‡¤‡fi°‡ (SCPLUS). The display shows 

Terminals&Sets.

4. Press 

‘ until the display shows System 

prgrming.

5. Press 

≠. The display shows Hunt groups.

6. Press 

≠. The display shows

 

Show group.

7. Enter the Hunt Group number you want to program (1-30).

8. Press 

≠. The display shows

 

Member DNs:.

9. Press 

‘. The display shows Line assignment.

10. Press 

≠. The display shows

 

Show line:.

11. Enter the line number you want to program and press SCAN 

to go to the first line assigned to this group, or press LIST 
to go to the first line in the system.

12. Press CHANGE to program the line as Unassigned or 

Assigned.
*HGnn* means the line is assigned to another Hunt Group.

13. Press 

® to exit or ‘ to continue programming.

There are three modes of call distribution:

•

Broadcast—rings each set in the group simultaneously. 
Calls are handled one at a time; other calls are queued. As 
soon as a call is picked up, the call next in the queue is 
presented to the Hunt Group without having to wait for 
queue time-out.

p0881591.book  Page 139  Wednesday, August 19, 1998  6:43 PM