Справочник Пользователя для Nortel Networks Modular ICS 4.0

142 / Programming Hunt Groups

Modular ICS 4.0 System Coordinator Guide

P0881591 Issue 01

8. Press 

≠. The display shows

 

Member DNs:.

9. Press 

‘ until the display shows Hunt delay.

10. Press CHANGE to select the setting: 1, 2, 3, 4, 5, 6, 7, 8, 

9, 10.

11. Press 

® to exit or ‘ to continue programming.

A Hunt Group is considered busy if one of two scenarios 
exists:

•

all of its members are being presented an incoming Hunt 
Group call

•

all of its members are active on a Hunt Group call

There are three routing options if all members are busy:

•

BusyTone—the caller gets a busy tone

•

Overflow—the call is routed to an overflow position

•

Queue—the call stays in the system for a period of time. 
Within this period of time, the call is presented to an 
member if one becomes available. When the time-out 
occurs, the call is presented to an overflow position.

1. Place the programming overlay on any M7310 or M7324 

telephone.

2. Press 

ƒ••¤flfl‹›› (CONFIG). 

The display shows Password:.

3. Press

 

‡¤‡fi°‡ (SCPLUS). The display shows 

Terminals&Sets.

4. Press 

‘ until the display shows System 

prgrming.

5. Press 

≠. The display shows Hunt groups.

p0881591.book  Page 142  Wednesday, August 19, 1998  6:43 PM