Справочник Пользователя для Nortel Networks Modular ICS 4.0
144 / Programming Hunt Groups
Modular ICS 4.0 System Coordinator Guide
P0881591 Issue 01
Programming the overflow set
This setting allows you to program the overflow set to which
the Hunt Group calls are to be routed. Unless the overflow
position is a Hunt Group set, the call ceases to be a Hunt Group
call. If the overflow set is a Hunt Group set, the call is treated
as a new call and goes to the bottom of the queue.
the Hunt Group calls are to be routed. Unless the overflow
position is a Hunt Group set, the call ceases to be a Hunt Group
call. If the overflow set is a Hunt Group set, the call is treated
as a new call and goes to the bottom of the queue.
The overflow set can be a set DN number associated with a
voice mailbox.
voice mailbox.
1. Place the programming overlay on any M7310 or M7324
telephone.
2. Press
ƒ••¤flfl‹›› (CONFIG).
The display shows Password:.
3. Press
‡¤‡fi°‡ (SCPLUS). The display shows
Terminals&Sets.
4. Press
‘ until the display shows System
prgrming.
5. Press
≠. The display shows Hunt groups.
6. Press
≠. The display shows
Show group.
7. Enter the Hunt Group number you want to program (1-30).
8. Press
≠. The display shows
Member DNs:.
9. Press
‘. The display shows Overflow:.
10. Press
≠. The display shows
Overflow:HGn.
11. Press CHANGE to change the overflow position.
12. Enter the new overflow position.
13. Press
® to exit or ‘ to continue programming.
p0881591.book Page 144 Wednesday, August 19, 1998 6:43 PM