Справочник Пользователя для Nortel Networks Modular ICS 4.0
174 / Using System features
Modular ICS 4.0 System Coordinator Guide
P0881591 Issue 01
Clearing a Call Log password
If an individual has forgotten their Call Log password, you can
clear it in programming. The individual can then enter a new
password from his or her telephone.
clear it in programming. The individual can then enter a new
password from his or her telephone.
You need the programming template found at the front of this
guide. See “Getting started with Norstar” on page 1 for more
information.
guide. See “Getting started with Norstar” on page 1 for more
information.
1. Press
ƒ••¤flfl‹››.
2. Press
¤‹fl›fl (the default System Coordinator
password).
3. Press
‘ four times.
4. Press
≠ at Passwords.
5. Press
‘ until the display reads Call log pswds.
6. Press
≠ and enter the internal telephone number
of the telephone where you want to clear the Call Log
password.
password.
7. Press
≠, then press CLR to clear the password.
Using special telephones
Direct-dial
You can reach the direct-dial telephone by dialing a single
digit. The direct-dial telephone is usually in a central location,
such as a attendant’s desk. You can have up to five direct-dial
telephones for your Norstar system. It is usually the prime
telephone or the central answering position (CAP).
digit. The direct-dial telephone is usually in a central location,
such as a attendant’s desk. You can have up to five direct-dial
telephones for your Norstar system. It is usually the prime
telephone or the central answering position (CAP).
The direct-dial telephone can send up to 30 messages and can
invoke Services to activate the extra-dial telephone.
invoke Services to activate the extra-dial telephone.
p0881591.book Page 174 Wednesday, August 19, 1998 6:43 PM