Справочник Пользователя для Nortel Networks Modular ICS 4.0
Using System features / 175
P0881591 Issue 01
Modular ICS 4.0 System Coordinator Guide
You cannot forward calls to a direct-dial telephone that is
outside your Norstar system. See “Making changes to Call
Forward No Answer” on page 23.
outside your Norstar system. See “Making changes to Call
Forward No Answer” on page 23.
Note: ISDN terminals cannot use the Direct-Dial digit to
reach a Direct-Dial set.
Changing the direct-dial telephone assignments
Your installer or customer service representative sets up the
direct-dial telephone.
direct-dial telephone.
You can change which direct-dial telephone a telephone is
assigned to, or assign it no direct-dial telephone.
assigned to, or assign it no direct-dial telephone.
You need the programming template found at the front of this
guide. See “Getting started with Norstar” on page 1 for more
information.
guide. See “Getting started with Norstar” on page 1 for more
information.
1. Press
ƒ••¤flfl‹››.
2. Press
¤‹fl›fl (the default System Coordinator
password).
3. Press
≠ at Terminals&Sets.
4. Enter the internal number of the telephone you want to
program and press
≠. The display reads
Capabilities.
5. Press
≠.
6. Press
‘ until the display reads D-Dial.
7. Press CHANGE to select Set1, Set2, Set3, Set4, Set5 or
None.
p0881591.book Page 175 Wednesday, August 19, 1998 6:43 PM