Emerson Process Management 3400 用户手册
Meter setup and configuration worksheet
Reference, Installation, and Operations Manual
June 2013
3-9000-743 Rev S
321
Meter setup and configuration worksheet
Daniel MeterLink Software Startup and Meter Configuration
Type
Description or P/N
Manual Reference
User Notes
•
Communications Wizard
•
Establish communication
parameters for the Liquid Ultra-
sonic Meter. This includes both
the serial and Ethernet ports.
parameters for the Liquid Ultra-
sonic Meter. This includes both
the serial and Ethernet ports.
•
•
through
•
Field Setup Wizard
-
Meter Configuration
-
Communications Parameters
-
Startup
-
General
-
Frequency Outputs
-
Current Outputs
-
HART® Outputs
-
Meter Digital Outputs
-
Meter Corrections
-
Temperature and Pressure
-
GC Setup
-
AGA 8 Setup
-
Continuous Flow Analysis
•
Available while connected to a
meter used to enter site
specific information during
initial startup or to change:
meter used to enter site
specific information during
initial startup or to change:
-
Meter units system
-
Volumetric flow rate time
-
Gage or Absolute Pressure
type
type
•
•
•
•
Update Time
•
The Update Time Wizard is
used to adjust the behavior of
the meter's signal sampling and
output updates.
used to adjust the behavior of
the meter's signal sampling and
output updates.
•
•
•
Baseline Setup
•
Used to establish a baseline of
the meter’s flow characteris-
tics after installation. The
baseline can then used by the
Continuous Flow Analysis
features to monitor the health
of the meter.
the meter’s flow characteris-
tics after installation. The
baseline can then used by the
Continuous Flow Analysis
features to monitor the health
of the meter.
•
Table E-1 Daniel 3400 Series Gas Ultrasonic Flow Meter setup and configuration reference sheet (Sheet 5 of 6)