Emerson Process Management 3400 用户手册

下载
页码 398
Meter to Flow Computer Communication Worksheet
 322
 Reference, Installation, and Operations Manual
Meter setup and configuration worksheet
3-9000-743 Rev S
June 2013
E.2 Meter to Flow Computer Communication Worksheet
Fill in the worksheet, 
, to use as a quick reference in setting up the Daniel 3400 Series Gas Ultrasonic Flow Meter 
communications (refer to the Daniel MeterLink context sensitive Help (
F1)
 files at any time for details) 
 
Type
Description or P/N
Manual Reference
User Notes
Calibration 
Using Meter Factors for cali-
brating the meter.
Factory calibration coefficients 
for each flow direction
Customer flow calibration 
method
and
 
Maintenance Logs and Reports
Monitor a Liquid Ultrasonic 
Meter for a user-defined set of 
time and display the data and 
results in a series of logs and 
charts. 
Table E-2  Meter to Flow Computer Communication Worksheet  (Sheet 1 of 9)
Description
The meter has three serial communication ports (Port A, Port B, and Port C) and one Ethernet port. Ports A and B can be configured for RS 232, RS 485 Full Duplex, and RS 485 Half 
Duplex communication. Port C can be configured for RS 232 and RS 485 Half Duplex. A PC running Daniel MeterLink can be connected to the meter via RS 232, RS 485 Full Duplex 
or Ethernet (i.e., not via RS 485 Half Duplex). A flow computer or RTU can be connected to the meter via any serial port (i.e., not the Ethernet port).
Serial Port A
User Selection (Circle one)
Results (Enter here) 
Connection to
<Flow computer, 
RTU, etc.>
PC running Daniel 
MeterLink
Not used
Table E-1  Daniel 3400 Series Gas Ultrasonic Flow Meter setup and configuration reference sheet  (Sheet 6 of 6)