Oritron ICS-2100 用户手册

Doc. 065291-01 3/09

5. Check that none of the 

lines are caught under the 
CR-TC and then push the 
CR-TC onto the metal 
stud inside the EGC 
holder. Push down until 
the CR-TC snaps in place 
(see 

6. Feed the CR-TC cable 

through the slot on the 
side of the EGC holder 
(see 

7. Turn the EGC holder right side up and set it on top of the ICS-2100.

8. Direct the 

 line from the top of the ICS-

2100 to the rear panel. Snap the line onto one of the tubing clips on 
the rear panel. Connect the line to the gas separator waste tube (see