Roland C-190 用户手册
Additional functions
16
r
C-190 Portable Organ
5.
Additional functions
Adding reverb
The C-190 allows you to add reverberation to what
you play on the keyboard. The reverb effect provides
a pleasant reverberation that gives the impression
that you are performing in a concert hall, a church,
etc.
you play on the keyboard. The reverb effect provides
a pleasant reverberation that gives the impression
that you are performing in a concert hall, a church,
etc.
(1) Press the [REVERB] button (it lights).
If you like the reverb effect but think it is too promi-
nent or too faint, here’s how to change the reverb
depth:
nent or too faint, here’s how to change the reverb
depth:
(2) Press the [DOWN] button to decrease the reverb
level, or the [UP] button to increase it.
Note: Press [DOWN] and [UP] simultaneously to recall the
C-190’s original reverb depth.
C-190’s original reverb depth.
(3) To switch off the reverb effect, press the [REVERB]
button once again. Its indicator goes dark.
Selecting another reverb type
(4) Switch on the reverb effect (see above).
(5) Press and hold the [REVERB] button until its indica-
tor starts flashing.
(6) Press the [DOWN] or [UP] button to select a differ-
ent reverb type.
The available types are: Plate, Small Ambient, Room,
Gothic Church, Church, Cathedral
The available types are: Plate, Small Ambient, Room,
Gothic Church, Church, Cathedral
Selecting different tunings
Tuning the C-190
There may be times when you accompany acoustic
instruments that are difficult or impossible to tune. In
that case, use the C-190’s TUNE function to adapt its
tuning to that of the acoustic instrument:
instruments that are difficult or impossible to tune. In
that case, use the C-190’s TUNE function to adapt its
tuning to that of the acoustic instrument:
(1) Hold down the [TUNE] button while pressing the
[DOWN] button to lower the tuning.
You can lower the C-190’s overall tuning to as much
as 432.8Hz. This frequency refers to the tuning of the
A4.
as 432.8Hz. This frequency refers to the tuning of the
A4.
(2) Hold down the [TUNE] button while pressing the
[UP] button to raise the tuning.
You can increase the C-190’s overall tuning to as
much as 445.2Hz.
much as 445.2Hz.
(3) Hold down the [TUNE] button while pressing the
[DOWN] and [UP] button to return to the C-190’s
default tuning (A4= 440Hz).
The [TUNE] button only lights when the C-190’s tun-
ing differs from 440.0Hz.
default tuning (A4= 440Hz).
The [TUNE] button only lights when the C-190’s tun-
ing differs from 440.0Hz.
Note: This setting can be saved to the global area.