Roland MOBILE CUBE 用户手册
Español
Itali
a
no
Franç
a
is
Deutsch
English
Por
tug
uê
s
Ne
derla
nds
5
Getting ready to use
Inserting Batteries
The MOBILE CUBE can also be powered with six
AA batteries. Insert the batteries as shown in the
figure, making sure that the batteries are oriented
correctly.
AA batteries. Insert the batteries as shown in the
figure, making sure that the batteries are oriented
correctly.
*
Use only manganese or alkaline batteries.
*
When closing the lid of the battery compartment, first
insert the catches on the lid into the matching
cavities, then push the lid down firmly until you hear
a click
insert the catches on the lid into the matching
cavities, then push the lid down firmly until you hear
a click
Using Batteries
Please note the following points.
923
*
If there are batteries in the unit while an AC adaptor
is being used, normal operation will continue should
the line voltage be interrupted (power cord
disconnection).
is being used, normal operation will continue should
the line voltage be interrupted (power cord
disconnection).
*
When installing or replacing batteries, always turn
off the power on this unit and disconnect any other
devices you may have connected. This way, you can
prevent malfunction and/or damage to speakers or
other devices.
off the power on this unit and disconnect any other
devices you may have connected. This way, you can
prevent malfunction and/or damage to speakers or
other devices.
961
*
Expected battery life under continuous use:
Alkaline: approx. 15 hours
This figure will vary depending on the actual
conditions of use.
Alkaline: approx. 15 hours
This figure will vary depending on the actual
conditions of use.
944a
*
When operating on battery power only, the unit’s
indicator will become dim when battery power gets
too low. Replace the battery as soon as possible.
indicator will become dim when battery power gets
too low. Replace the battery as soon as possible.
*
Avoid using new batteries together with used ones. In
addition, avoid mixing different types of batteries.
addition, avoid mixing different types of batteries.
Using the AC Adaptor (Option)
Attaching the Strap
1. Pass the strap through the strap holder.
2. Secure the strap to the strap pin.
Attach the strap securely so that it does not easily
become detached. If the strap is loose, and you use
it that way when carrying the MOBILE CUBE, the
amp could be dropped, possibly resulting in
damage or injury.
become detached. If the strap is loose, and you use
it that way when carrying the MOBILE CUBE, the
amp could be dropped, possibly resulting in
damage or injury.
*
Use only the provided strap.
The included strap is meant for exclusive use with the
MOBILE CUBE. Do not use this strap for other
products.
The included strap is meant for exclusive use with the
MOBILE CUBE. Do not use this strap for other
products.
*
Do not spin or swing the MOBILE CUBE while
holding it by the strap. This is extremely dangerous,
as it may cause the strap to become detached; or, if the
motion is repeated enough, may even break the strap.
holding it by the strap. This is extremely dangerous,
as it may cause the strap to become detached; or, if the
motion is repeated enough, may even break the strap.
+
-
+
-
+
-
+
-
+
-
+
-
Strap pin
MOBILE_CUBE_egfiepn.book Page 5 Wednesday, March 5, 2008 10:35 AM