Roland MOBILE CUBE 用户手册

下载
页码 64
6
Panel Descriptions
Control panel
MIC
This is a dedicated microphone input.
It can be used simultaneously with 
KEYBOARD/ INSTRUMENT/ GUITAR 
and AUX.
1. VOLUME Knob
Adjusts the microphones volume.
*
Howling could be produced depending on the location of 
microphones relative to speakers. This can be remedied 
by:
1. Changing the orientation of the microphone(s).
2. Relocating microphone(s) at a greater distance from 
speakers.
3. Lowering volume levels.
KEYBOARD/INSTRUMENT/GUITAR
This accommodates any type of input, 
including a keyboard or other electronic 
musical instrument, a recorder or audio 
device, or an acoustic guitar or electric 
guitar.
2. Type Switch
Set this to the type of device that you’ve 
connected to the KEYBOARD/ INST jack.
A-GUITAR
Select this if you’ve connected an acoustic 
guitar that has a pickup
Use the L/ MONO GUITAR jack to make 
connections. The R jack cannot be used.
KEYBOARD/INSTRUMENT 
(stereo input is supported)
Select this if you’ve connected an 
instrument such as a keyboard or a guitar 
multi-effects device. You can choose either 
a NORMAL or FAT tone.
NORMAL
This provides flat tonal response.
FAT
This provides a powerful tone with 
boosted midrange.
AUDIO (stereo input is supported)
Select this if you’ve connected an audio 
device, a recorder, or a mixer. This is ideal 
for monitoring the mixed sound.
E-GUITAR
Select this if you’ve connected an electric 
guitar. Three types of sound are available: 
CLEAN, OVERDRIVE, and DIST 
(distortion). Use the L/ MONO GUITAR 
jack to make the connection. The R jack 
cannot be used.
CLEAN
This provides a bright, clear sound.
OVERDRIVE
Natural distortion sound similar to that 
obtained by turning an amp’s volume up 
completely.
DIST (DISTORTION)
Harder distortion than OVERDRIVE.
1
2
3
4
5
6
7
8
MOBILE_CUBE_egfiepn.book  Page 6  Wednesday, March 5, 2008  10:35 AM