Husqvarna 96732400200 用户手册

23

MAINTENANCE

The machine is equipped with a safety system that prevents 
starting or driving under the following conditions.
The engine can only be started when:

•  the mower deck is disengaged.
•  the steering / park brake controls are in the outer, locked 

neutral position.

IMPORTANT INFORMATION  To be able to drive, the 
driver must sit in the seat and the steering / park brake 
controls must be moved into the engaged (outer) position. 
Otherwise the engine will stop.

Visually check that no damage is found on the steering control 
levers, links or switches belonging to the park brake. Perform a 
standstill test and check that there is sufficient braking action.
To adjust the park brake, contact the Husqvarna service 
workshop.

IMPORTANT INFORMATION  The machine must be 
absolutely standing still when applying the park brake.

  WARNING!  Faulty adjustment will result in reduced 

braking ability and can cause an accident.

Make daily inspections to ensure that the safety system works 
by attempting to start the engine when one of the conditions is 
not met. Change the conditions and try again.
If the machine starts when one of these conditions is not met, 
turn the machine off and repair the safety system before using 
the machine again.
Make sure the engine stops when the park brake is not 
engaged and the operator leaves the seated position.
Check that the engine stops if the mower blades are engaged 
and the driver temporarily moves off the drivers seat.

All tires should be at 15 psi / 103 kPa / 1 bar.

IMPORTANT INFORMATION  DO NOT add any type of 
tire liner or foam fill material to the tires. Excessive loads 
created by foam filled tires will cause premature failures.
Only use O.E.M. specified tires.