Roland VS-1824 用户手册
108
Chapter 7 Using Internal Effects (VS8F-2)
Two Examples of Using Loop
Effects
Effects
Example 1: Add a Delay to a Recorded
Vocal Track.
Vocal Track.
General Strategy:
Connect the effect in the Track Mixer,
post-fader.
Details for this Example:
Select Patch P024 as FX2, connect
to Track 6.
Begin by Selecting the Effect:
1. Press [PLAY (DISPLAY)].
2. Hold [SHIFT] and press [F3 (EFFECT A)].
3. Press [F4 (FX2)]. The Effect 2 screen appears in the
display. If “FX2” does not appear above [F4], press [F6
(EXIT)] until it does. Then, press [F4 (FX2)].
(EXIT)] until it does. Then, press [F4 (FX2)].
4. Press [F2 (Sel)]. The effects list appears in the display.
5. Use the TIME/VALUE dial or [
], [
], [
],
and [
] to move the cursor to Effect Preset Patch P024
“Long Delay.”
6. Press [F4 (Exec)] or press [ENTER/YES] to select the
effect. The EFFECT 2 screen appears in the display.
Next, Set up the Mixer
1. Press the SELECT button for Track 6. The button
indicator lights, and the Track Mixer Screen appears in
the display.
the display.
2. Use [
], [
], [
], and [
] to move the
cursor to “FX2.” Or, press [F2 (FX2)]. If “FX2” does not
appear above [F2], press [PAGE] a few times until you
see “FX2”, and then press [F2 (FX2)].
appear above [F2], press [PAGE] a few times until you
see “FX2”, and then press [F2 (FX2)].
3. Use the TIME/VALUE dial to change the FX Switch to
“Pst” (“post-fader”).
4. Press [
] and [
] to move the cursor to the Effect
Send Level, and use the TIME/VALUE dial to change the
level to “70.”
level to “70.”
5. Press [PLAY (DISPLAY)] to return to the Playlist display.
Example 2: Add Reverb to Drum
Tracks
Tracks
General Strategy:
Connect the effect on multiple Track
Mixer channels, post-fader.
Details for this Example:
Select Patch P006 as FX3, and
connect on Tracks 7-12.
Begin by Selecting the Effect:
1. Press [PLAY (DISPLAY)].
2. Hold [SHIFT] and press [F4 (EFFECT B)].
3. Press [F1 (FX3)]. The Effect 3 screen appears in the
display. If “FX3” does not appear above [F1], press [F6
(EXIT)] until it does. Then, press [F1 (FX3)].
(EXIT)] until it does. Then, press [F1 (FX3)].
4. Press [F2 (Sel)]. The effects list appears in the display.
5. Use the TIME/VALUE dial or [
], [
], [
],
and [
] to move the cursor to Effect Preset Patch P006
“Medium Room.”
6. Press [F4 (Exec)] or press [ENTER/YES] to select the
effect. The EFFECT 3 screen appears in the display.
Next, Set up the Mixer
1. Press Track 7 SELECT. The button indicator lights, and
the Track Mixer Screen appears in the display.
2. Use [
], [
], [
], and [
] to move the
cursor to “FX3.” Or, press [F3 (FX3)]. If “FX3” does not
appear above [F3], press [PAGE] a few times until you
see “FX3”, and then press [F3 (FX3)].
appear above [F3], press [PAGE] a few times until you
see “FX3”, and then press [F3 (FX3)].
3. Use the TIME/VALUE dial to change FX Switch to “Pst.”
4. Press [
] and [
] to move the cursor to the Effect
Send Level, and use the TIME/VALUE dial to change the
level to “70.”
level to “70.”
5. Repeat Steps 1-4 for Track 8-12. Press the Track SELECT
button for each of these tracks to make the effect settings.
6. When you are finished setting up effect loops on Tracks
7-12, press [PLAY (DISPLAY)] to return to the Playlist
display.
display.