Roland VS-1824 用户手册

Chapter 7

It is possible to apply effects while recording so that the 
effect becomes a permanent part of the recorded track, or so 
that the effect is only used during recording for monitoring 
purposes. The method for applying effects while recording 
depends on whether you want the track recorded with the 
effect or not.

Here are a few recording terms you should be familiar with:

This verb means the same as “record.”

Processed using an effect. A wet track has an effect on it.

The track has no effects on it.

Same as “dry.”

Record with an effect. Use an effect while recording so 
that the effect becomes a permanent part of the 
recording. If you print a vocal track “wet” using a 
reverb, it is impossible to remove the reverb from the 
vocal track later to hear just the “dry” vocal.

1. Listening to an Insert Effect While Recording

Using an insert effect while recording a track, without 
the effect becoming a permanent part of the track.

2. Listening to a Loop Effect While Recording

Using a loop effect while recording a track, without the 
effect becoming a permanent part of the track.

3. Recording Insert Effects

Using an insert effect while recording a track so the 
effect becomes a permanent part of the track.

4. Recording Loop Effects

Using an Effect Loop while recording a track so the effect 
becomes a permanent part of the track.

The most important thing to keep in mind while using effects 
during the recording process is deciding whether you want 
the effect to “print” or not. That decision will determine 
where the effect should be connected. In some cases, the 
effect will need to be connected in the Input Mixer. In other 
cases, the effect will need to be connected in the Track Mixer.

Use the following procedure when you want to record a 
guitar track dry, without any effects or processing, while 
allowing the guitar player to hear the guitar processed by 
one of the guitar amp simulators in the VS-1824.

 Insert the effect in the Track Mixer.

 Select Patch P088 as FX1, insert on 

Track Mixer Channel 8.

1. Press [PLAY (DISPLAY)].

2. Hold [SHIFT] and press [F3 (EFFECT A)].

3. Press [F1 (FX1)]. The Effect 1 screen appears in the 

display. If “FX1” does not appear above [F1], press [F6 
(EXIT)] until it does. Then, press [F1 (FX1)].

4. Press [F2 (Sel)]. The effects list appears in the display.

5. Use the TIME/VALUE dial or [

], [

], [

], 

and [

] to move the cursor to Effect Preset Patch P088 

“Guitar Multi 1.”

6. Press [F4 (Exec)] or press [ENTER/YES] to select the 

effect. The EFFECT 1 screen appears in the display.

1. Press the SELECT button for Track 8. The button 

indicator lights, and the Track Mixer Screen appears in 
the display.

2. Use [

], [

], [

], and [

] to move the 

cursor to “FXIns.” Or, press [F1 (FX1In)]. If “FX1In” does 
not appear above [F1], press [PAGE] a few times until 
you see “FX1In,” and then press [F1 (FX1In)]. This will 
move the cursor directly to “FXIns.”

3. Press [ENTER/YES].

4. Use [

] and [

] to move the cursor to FX1. Use the 

TIME/VALUE dial to change the Effect Insert Switch to 
“Ins.”

5. Press [PLAY (DISPLAY)] to return to the Playlist display.

Now you’re ready to record as usual.

Later, when you play the track with the effect still inserted, 
you will hear the effect. This doesn’t mean you’ve recorded 
the track with the effect. As soon as you turn the effect off, 
you’ll hear the dry guitar. This is a great way to record, as it 
provides you the flexibility to decide which effect to use after 
the recording has been made.