Cisco Systems IAD2430 用户手册

Chassis grounding is provided through the power cable, which uses a standard grounding plug. The 
chassis is also equipped with two 4 x 0.7 screw terminals for chassis grounding. The accessory kit 
contains a crimp-type ground lug that attaches to the two screw terminals. For more information, see the 

.

The Cisco IAD2430 series routers contain flash memory and main memory.

Onboard flash memory contains the Cisco IOS software image, boot flash contains the ROMMON boot 
code, and counterfeit prevention contains the cookie configuration.

The default flash memory for the Cisco IAD2430 series IADs is 128 MB. Onboard CPU memory is 
256 MB.

Port numbering conventions for Cisco IAD2430, IAD2431, and IAD2432 series IADs are as follows:

An external flash memory card is numbered CF 0.

The 10/100BASE-T ports are numbered 10/100BASE-T 0/0 and 10/100BASE-T 0/1, from right to 
left.

The T1/E1 ports are numbered T1 1/0 or E1 1/0 and T1 1/1 or E1 1/1, from right to left.

The slot for WICs and VICs is numbered slot 0. WIC and VIC interfaces are numbered by interface 
with this slot number and an interface number, beginning with 0 and numbered from right to left.

FXS voice port numbering begins at 2/0 and extends to 2/7, 2/15, or 2/23, depending on the number 
of voice ports.

PWR 
OK—green

Off—no power

 

Steady on—normal operation

 

Slow blink—boot up phase or in ROMMON monitor mode

FE ports 
0/1—green

Off—No link

 

Steady on—link

 

Blinking—TXD/RXD data

T1/E1 (carrier 
detect)—green

T1/E1 
AL—Amber

Off—no Carrier Detect

 

Steady on—Carrier Detect

 

Off—no Alarm condition

 

Steady on—Alarm condition

FXS ports 0 
through 
7—green

Off—On hook

 

Steady On—Off hook