Cisco Systems IAD2430 用户手册

When you install a Cisco IAD2430 series IAD, see the 

 for 

the initial configuration. This configuration sets the basic communication parameters. After the Cisco 
IAD is operating and able to communicate, use the procedures in the

 to configure the specific services and functions, or to make changes to the existing 

configuration.

You can use any of several manual methods for configuring a Cisco IAD2430 series IAD:

System configuration dialog

Configuration mode—Cisco IOS software command-line interface (CLI)

setup command facility—Remote configuration through a LAN or WAN

SNMP-based application—CiscoView or HP OpenView

HTTP-based configuration server—Provides access to the CLI from a web browser

 describes the various physical ports and the services that each port type supports, including 

the following.

Two administrative ports—One console and one auxiliary.

The Cisco IAD2435 IAD provides a connection to the terminal or PC for software 
configuration or troubleshooting. The console port may be configured as a virtual auxiliary 
port for dial backup and remote management.

One or two 10/100BASE-T LAN ports.

One or two Fast Ethernet ports.

The Cisco IAD2431 and Cisco IAD2432 IADs for a T1/E1 WAN interface are equipped with one 
or two T1/E1 WAN ports.

Cisco IAD2430 series IADs for an analog voice user interface are equipped with an RJ-21 port for 
connection to a distribution panel.

Cisco IAD2432 IADs for adigital voice user interface are equipped with a T1/E1 port for connection 
to a PBX.

All Cisco IAD2430 series IADs are customer premises equipment (CPE) only.